Manufacturer
RUST-OLEUM CORPORTAION
Description
Looking for a "silver bullet" primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).
Specifications
Global Product Type: Building/Construction Paints & Primers
Paint Sub-Category: Primer, Shellac-Based
Color Family: White
Intended Application Environment: Interior/Exterior
Finish/Sheen: Flat
Recommended Level of Ventilation: Moderate
Volume Capacity: 1 gal
Packaging Type: Bucket/Pail
Binder/Vehicle Ingredient(s): Shellac
Diluent/Solvent Ingredient(s): Denatured Alcohol,Water
Color(s): White
Application Method: Brush,Roller
Application Temperature Range: 0 and 90 F
Applicable Surface Material: Cement,Concrete,Drywall,Glass/Ceramics,Masonry,Metal,Plaster,Plastic,Wood
Maximum Coverage Area: 500 sq ft
Cure/Dry-Time Range: 20 min (Touch),45 min (Handle, Re-Coat),1-3 Days (Full Cure)
Age Recommendation: Ages 16 and Up
Product Biodegradability Indicator: N
Product Biodegradability in Days: 0
Product Compostability Indicator: N
Pre-Consumer Recycled Content Percent: 0%
Post-Consumer Recycled Content Percent: 0%
Total Recycled Content Percent: 0%
Disclaimer Statement: B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90 F (-18 and 32 C) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15 F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Footnote 1: Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2: Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Country Of Origin: US
Carton Weight: 22 lbs.
Carton Pack Quantity: 2 EA
Pack Quantity: 0
UPC: 047719009016
UNSPSC: 31211509
